Hdd Management - Lorex L19WD Serie Manual De Instrucciones

Using the System

HDD Management

Format the hard disk, view HDD info, and set disk
Overwrite on and off.
HDD SETUP
Use Clear HDD to format the hard disk.
This erases all recorded video data from
the hard disk. By default, the system
comes with a pre-formatted hard disk.
ATTENTION: Only format the hard disk if
absolutely necessary. All the data on your
hard drive will be lost. You cannot undo
this step
To format the hard disk:
1. Click START.
Login screen pops-up.
2. Enter your username and password
and click OK.
Screen icons turn grey as system
clears the hard disk.
3. Click OK.
Note: Clearing the hard disk will not
delete your system settings.
40
OVERWRITE
Overwrite determines how data is
maintained when the hard disk is full.
With Overwrite turned on, data is
overwritten once the hard disk is full,
starting with the oldest recording.
If Overwrite is turned off, the system stops
recording once the hard disk is full;
recording stops and the Buzzer activates.
The Overwrite Icon appears in place of the
hard drive percentage icon.
Note: Use the hard drive percentage
icon in the bottom-right corner of the
screen to keep track of the space
remaining on your system's hard disk.
HDD INFO
Click HDD Info to see the Model Number,
Serial Number, and Size of your system's
hard disk.