Installation Instructions; Assembly And Installation - CHIEF iC Serie Manual De Instrucciones

Installation Instructions

1
(F)
2a
Center of screen
3
(A)
Vertical center
of mount

ASSEMBLY AND INSTALLATION

The iCXPFM2 and iCXPTM2 have been designed to be
mounted directly onto either a wood stud or concrete wall. The
iCXPFM2 has static brackets which keep the TV in an upright
position. The iCXPTM2 has brackets which allow the TV to be
tilted.
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SEVERE PERSONAL INJURY
OR DAMAGE TO EQUIPMENT! It is the installers
responsibility to make certain the structure to which the
mount is being attached is capable of supporting five times
the weight of the iCXPFM2 or iCXPTM2 and all attached
equipment not to exceed 250 lbs (113.4 kg).
Assembling the Wall Mount
1. Place both wall uprights (F) on the floor.
2. Slide rails (A) into wall uprights.
3. Thread endcaps (G) into the end of each rail.
(G)
NOTE:
Proceed to either the Installing to a Wood Stud Wall
(2a) section or the Installing to a Concrete Wall (2b)
section.
Installing to a Wood Stud Wall
1. Determine the center of the TV screen, and where it should
be located on the wall.
2. Locate the stud to the left and right of the selected location.
CAUTION:
MINIMUM HORIZONTAL DISTANCE
BETWEEN WALL BRACKETS IS 24". Do not place
mounting brackets closer together than 24".
6"
CAUTION:
When attaching to a wall containing studs
located 16" on center, space the uprights 32" apart.
3. Line up the diamond on mount with center of screen
marking to determine vertical center.
4. Measure up 6" from the center point to mark location of the
upper mounting slots.
iCXPFM2 / iCXPTM2
11