EGO BBA2100 Manual Del Usuario página 11

Fig. N parts description see below:
N-1
Hole
N-2 Rib
3. Push the brush roller onto the drive axle (see Fig. G).
4. Insert the hitch pin in the hole at the end of the drive
axle and fold it flat.
5. Follow the same steps to mount the other brush
roller.
WARNING:
Always replace both brush rollers at the
same time.
CLEAN THE UNIT
◾
Remove the battery.
◾
Clear the pieces of roots, clogged soils, or plants from
the brush rollers, guard, or the gear box. For thorough
cleaning, remove the brush rollers and guard to wash
them thoroughly. For detailed replacement steps please
see above section"REPLACING THE BRUSH ROLLERS".
◾
Keep the air vents free of obstructions.
STORING THE UNIT
◾
Remove the battery pack from the tool.
◾
Clean the tool thoroughly and inspect the brush rollers.
◾
Remove the bristle brush attachment from the power
head and cover the attachment shaft with end cap to
avoid dirt getting into the coupling.
◾
Store the tool in a dry, well-ventilated area, locked-up
or up high, out of the reach of children. Do not store
the unit on or adjacent to fertilizers, gasoline, or other
chemicals.
Protecting the environment
Do not dispose of electrical equipment,
battery charger and batteries/rechargeable
batteries into household waste! According
to the European law 2012/19/EU, electrical
and electronic equipment that is no longer
usable and according to the European law
2006/66/EC, defective or used battery
packs/batteries, must be collected
separately. If electrical appliances are
disposed of in landfills or dumps,
hazardous substances can leak into the
groundwater and get into the food chain,
damaging your health and well-being.
BRISTLE BRUSH ATTACHMENT — BBA2100
EN
11