Instruction Manual - GRAPHITE 58G792 Manual Del Usuario

GWARANCJA I SERWIS
Warunki gwarancji oraz opis postepowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service tel. +48 22 573 03 85
Ul. Pograniczna 2/4 fax. +48 22 573 03 83
02-285 Warszawa e-mail [email protected]
Sieć Punktów Serwisowych
i pogwarancyjnych dostępna
gtxservice.pl
GRAPHITE zapewnia dostępność części zamiennych oraz materiałów
eksploatacyjnych dla urządzeń i elektronarzędzi. Pełna oferta części
i usług na gtxservice.pl.
Zeskanuj QR kod i wejdź na gtxservice.pl
do napraw gwarancyjnych
na platformie internetowej
TRANSLATION OF
THE ORIGINAL INSTRUCTIONS
ELECTRIC DRILL DRIVER
58G792
NOTE: BEFORE THE TOOL IS USED FOR THE FIRST TIME, READ THIS
INSTRUCTION MANUAL AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
WARNING: Safety regulations must be observed, when the device
is operated. This instruction manual and general safety information
should be read for your own and bystanders' safety, before the
tool is operated. This instruction manual should be kept for future
reference.
REMEMBER: The operator or user is responsible for accidents or
hazards occurring to other people or the environment.
• When the tool is operated, work safety and hygiene regulations in
force should be strictly observed.
• Before operation is commenced, check the unwound power cord
for damage or wear.
• Before connecting to the power source, always make sure the
supply voltage is compatible with the value specified on the
nameplate of the tool.
• The tool can be connected only to an electrical system equipped
with a differential current protection that will cut the power off
when earth leakage current exceeds 30 mA in less than 30 ms.
• Do not allow the tool to be operated by children and people not
familiarized with the instruction manual.
• Before you begin working, make sure there is enough free space
and proper lighting over the work station.
• Check the workpiece for correct fastening.
• Do not use the tool in rooms with explosive atmospheres.
• Make sure that ventilation holes of the tool are passable and kept
clean during operation.
• Before cleaning, the tool must be disconnected from power
supply. Clean the tool using a brush.
• Always use eye and ear protection.
• It is also recommended to use personal protection equipment,
such as dust mask and protective apron.
• Do not attempt to repair the tool on your own.
• All repairs should be performed by a qualified person only, or in an
authorised service centre, using original spare parts.
NOTE! The tools is intended for indoor works.
Despite using the construction, which is safe by design itself,
protection means and additional safety features, there is always
a residual risk of injuries during operation.
CONSTRUCTION AND APPLICATION
The drill and driver is an electric hand tool driven with a single-
phase commutator motor, whose speed is reduced by means of
the gear transmission. Power tools of this type are widely used for
tightening and loosening of screws, making holes in wood and
wood-like materials, steel, ceramics, etc. The electric drill and driver
can also be used with a series of drill bits, sockets, screwdriver bits of
various lengths. The range of applications of the drill driver include
renovation, carpentry, locksmithing and building works, as well as all
types of DIY and around the house works.
The power tool should be used according to its purpose.
DESCRIPTION OF GRAPHIC PAGES
The below list refers to device components shown in the graphic
pages of this instruction manual.
Quick-coupling chuck
1.
Torque control ring
2.
9