Getting Started; Batteries; About Radio Reception; Turn The Radio Reception On / Off - Oregon Scientific RM998PS Manual Del Usuario

GETTING STARTED

BATTERIES

Batteries are supplied with this product:
• 3 x UM-4 / AAA 1.5V batteries
The optional wake-up vibration alarm VR101 (not included
in the package) uses:
• 2 x UM-3 / AA 1.5V batteries
NOTE It is recommended that you use alkaline batteries
with this product for longer performance.
Insert batteries before first use, matching the polarity (+ and
-) as shown below. Press RESET after each battery change.
NOTE Do not use rechargeable batteries with this product.
BATTERY ICON MEANING
Batteries are low, or there are no
batteries installed and only the
adaptor is connected
The LED indicator on the vibration alarm will flash red when
the batteries are low.
AC ADAPTOR
The batteries serve as a back-up power supply. To operate
the voice activated function and for continuous use of the
projector, install the AC adaptor at the base of the unit as
shown below.
NOTE To help conserve energy, turn the PROJECTION
ON switch to OFF when you do not wish to use it.

ABOUT RADIO RECEPTION

This clock can automatically synchronize the date and time
with official time-keeping organizations in Frankfurt
(Germany) and Rugby (England). The unit can pick up a
Radio Frequency (RF) signal when it is within 1500 km (932
miles) of these locations.
To select the most suitable radio signal for your location,
slide the UK / EU switch to the appropriate setting. Press
RESET whenever you change the selected setting.
NOTE For best results, place the clock away from metal or
electrical objects, and near a window with a clear view to
the sky.

TURN THE RADIO RECEPTION ON / OFF

To turn the radio reception ON:
• Press and hold for 2 seconds.
5