Train The Talking Clock; Use The Talking Clock - Oregon Scientific RM998PS Manual Del Usuario

TRAIN THE TALKING CLOCK

To use the talking clock you need to train it to recognise
your commands. To do this, follow the key steps below and
listen to the clock's voice prompts:
TASK
Start training program (1st time training) Press Sound /
Select user 1 or 2
Tell the clock a word you would like to
become your password. (This word will
be used from now on to activate the
talking clock)
Train the clock to recognise your
commands. To do this, devise your own twice when asked
words for asking the clock to:
• Check the time
• Check alarm 1 and 2 status
• Turn alarm 1 or 2 ON / OFF
• Check the temperature
• Turn the projector ON
TIP The clock responds better to simple
commands
Skip to the next training command or
train more commands
Exit the training program
Re-do the training program
ACTION
on /
off or TALK
Press or . Then
press TALK
Say your password
Speak the command
Press
Press Sound / on / off
Press and hold TALK
9
USE THE TALKING CLOCK (ONCE IT HAS BEEN
TRAINED)
Use the steps detailed below and listen to the voice prompts:
TASK
Turn the talking clock ON
Bypass the introduction
Activate the talking clock when it is in
Standby Mode
Listen to trained commands
Exit the talking clock
Turn the talking clock OFF
NOTE When the talking clock is waiting for your voice
commands, the icon will flash to show it is waiting.
NOTE If the talking clock gets no response to its voice
prompts after approx. 1 min, it will sound a beep and go into
Standby Mode. To activate it, simply say your password.
NOTE The following talking clock languages are available
with these models:
• RM998PS – English, Italian, French and Spanish
• RM998PG – English, Italian, French and German
ACTION
Press Sound / on / off
or TALK
Press TALK
Say your password
Press TALK
Let the unit idle and it will
automatically go into
Standby Mode
Press Sound / on /
off twice