Brewing Coffee - Philips Mini comfort HD7460/10 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12

Brewing coffee

1
Open the lid.
C
2
Fill the watertank with the desired amount of cold, fresh water.
The water level in the water tank can be read from the winddow; the
markings correspond to large cups (125 ml; MAX = 5 cups). Ensure
that the water level does not get higher than the maximum marking
(MAX).
3
Close the lid.
4
Place the jug.
C
5
Open the filter holder.
6
Put a paper filter (type 1x2) in the filter holder.
Do not forget to fold the sealed edges of the filter.
With some models a permanent filter is supplied. In this case paper
filters are not required.
C
7
Put pre-ground coffee (filter-fine grind) in the filter.
8
Close the lid.
9
Switch the appliance on by pressing the button.
The pilot light will go on.
B
10
Switch the appliance off after use.
Let the appliance cool down for at least 3 minutes before you start
brewing coffee again.
Cleaning
1
Unplug the appliance.
2
Clean the outside of the appliance with a moist cloth.
Never immerse the appliance in water.
C
3
Clean the jug and the removable filterholder in hot soapy
water or in the dishwasher.
Descaling
Descale the appliance regularly. In case of normal use:
- 2 or 3 times a year if your are using soft water (less than 18cDH);
- 4 or 5 times a year if you are using hard water (more than 18cDH).
Turn to your local water board for information about the water
hardness in your area.
ENGLISH
7
Tabla de contenido
loading

Tabla de contenido