Generac RD015 Manual Del Propietário página 12

Specifications
2.2 — Specifications
2.2.1— Engine
General
Engine System
Type
Fuel Type
Fuel Filtering
Bore and Stroke
Displacement
Firing Order
Direction or Rotation
Dimensions L x W x H
Dry Weight
Compression Ratio
Cooling System
Water Pump
Drive
Thermostat
System Coolant Capacity
Coolant Flow Rate
Lubricating System
Oil Pump Type
Oil Filter Type
Oil Cooler
Crankcase Capacity
Lubricating Oil
Oil Fill Location
Oil Drain Location
Intake and Exhaust System
Intake Air System
Maximum Allowable
Intake Restriction
Maximum Allowable
Exhaust Back Pressure
Breather
Other Specifications
Operating Temperature Range
POWER ADJUSTMENT FOR AMBIENT CONDITIONS
Temperature Deration........................................................................................ 3% for every 5 °C above 25 °C or 1.7% for every 5 °F above 77 °F
Altitude Deration (15, 30, 48 & 50 kW) ...................................................... 1% for every 100 m above 915 m or 3% for every 1000 ft above 3000 ft
Altitude Deration (20 kW) ......................................................................... 1% for every 100 m above 305 m or 3% for every 1000 ft above 1000 ft
A complete specification sheet is included in the documentation provided with the unit at the time of purchase. For
additional copies, consult your local Authorized Service Dealer.
6
2.3L Engine
4 cylinder, in-line, 4 cycle
Ultra Low Sulfur Diesel
5 Microns
3.46 in x 3.70 in
(88 mm x 94 mm)
139.5 cubic inches (2.286 liter)
1-3-4-2
CCW - As Viewed From Flywheel
685 x 491 x 636 mm
(26.97 in x 19.33 in x 25.04 in)
441 lbs (200 kgs)
21.3 : 1
Pre-Lubed, Self-Sealing
Belt
Full Open Temperature:
185° F (85° C)
2.8 gal (10.6 liter)
10 gal (38 liter)/min at 1800 RPM
Gear
Full Flow Spin-On Canister
Not Applicable
6.87 qt. (6.5 liter)
15W-40
Filler Cap on Valve Cover and/or
Front Engine Cover
Oil Pan, Bottom Side
Naturally Aspirated
25 in. of Water (6.23 kPa)
23.6 in. of Water (5.88 kPa)
Closed Crankcase System
-20° F to 120° F (-29° C to 49° C)
2.4L-49 Engine
4 cylinder, in-line, 4 cycle
Ultra Low Sulfur Diesel
5 Microns
3.54 in x 3.70 in
(90 mm x 94 mm)
146 cubic inches (2.392 liter)
1-3-4-2
CCW - As Viewed From Flywheel
677.1 x 497.8 x 721.3 mm
(26.66 in x 19.60 in x 28.40 in)
573 lbs (260 kgs)
21.3 : 1
Pre-Lubed, Self-Sealing
Belt
Full Open Temperature:
185° F (85° C)
2.8 gal (10.6 liter)
10 gal (38 liter)/min at 1800 RPM
Gear
Full Flow Spin-On Canister
Installed
6.8 qt. (6.4 liter)
15W-40
Filler Cap on Valve Cover and/or
Front Engine Cover
Oil Pan, Bottom Side
Turbocharged
25 in. of Water (6.23 kPa)
23.6 in. of Water (5.88 kPa)
Open Crankcase System
-20° F to 120° F (-29° C to 49° C)
Owner's Manual for Stationary Diesel Generators
3.4L Engine
4 cylinder, in-line, 4 cycle
Ultra Low Sulfur Diesel
10 Microns
3.86 in x 4.45 in
(98 mm x 113 mm)
208.3 cubic inches (3.41 liter)
1-3-4-2
CCW - As Viewed From Flywheel
742 x 587 x 721 mm
(29.21 in x 23.11 in x 28.39 in)
551 lbs (250 kgs)
18.5 : 1
Pre-Lubed, Self-Sealing
Belt
Full Open Temperature:
185° F (85° C)
2.8 gal (10.6 liter)
12.2 gal (46 liter)/min at 1800 RPM
Gear
Full Flow Spin-On Canister
Installed
7.4 qt. (7.0 liter)
15W-40
Filler Cap on Valve Cover and/or
Front Engine Cover
Oil Pan, Front
Turbocharged/Aftercooled
25 in. of Water (6.23 kPa)
24 in of Water (5.98 kPa)
Open Crankcase System
-20° F to 120° F (-29° C to 49° C)