Front Control Panel - CP FAS 3000 Manual De Instrucciones

Part no 2050479093
Issue no 02
Series no -
Date 12/2006
Page 6 / 59

FRONT CONTROL PANEL

11 Four digit password may also be used to enter the program
menu or perform a GROUP RESET.
12 Press this button to:
• Exit or -go back" from a selected menu item. If the program
menu was accessed with the
• password, press this key to exit the program menu and return
to normal operation.
The FAS3000 will again be locked, and the password or key will
be needed to re-enter the program menu.
• Exit the menu option without making the change.
• At any time to exit the Auto-Cal process.
13 Pressing the Left or Right arrows will:
• Advance the display to the next or previous screen
respectively.
• Edit the next digit.
• Increment or deincrement the flashing digit.
• Turn the solenoid driver ON or OFF.
• Select the number of parameter sets in a sequence.
• Turn the -beep on ACCEPT" feature ON or OFF.
14 This button can be used to:
• Enter the program menu when unlocked, or to display the password prompt when the unit is locked.
• Select an item to edit from the menu.
• Save the change and exit the menu option.
15 Use the Up and Down buttons on the keypad to:
• Navigate the PROGRAM MENU.
• Change parameter sets.
• Edit the next digit.
16 In the event of a NOK, a GROUP RESET can be performed by unlocking the unit with the key or password and
pressing this button.
17 The key-switch is used to:
• Unlock the advanced features of the FAS3000.
When the key is in the locked position:
• The padlock-shaped symbol will be illuminated, the program menu will not be accessible, and the GROUP
RESET will not be available.
When the key is in the unlocked position:
• The pad-lock symbol will not be illuminated and all the afore mentioned features will be available.
18 In the event of a NOK, a cycle reset can be performed by pressing this button.
FAS 3000