D-Using Your Cooler; Start-Up - Ugur USS 60 DTKL Guia Del Usuario

D-USING YOUR COOLER

Start-up

WARNING!
• This operating manual applies for various device models. Hardware scopes of the models may vary. There
may be differences in the pictures.
• Clean inside and all accessories of your product before the first start up (see page 23).
• If your product has been shaken so much during the transportation and positioning, wait for one (1) our
without running your cooler. Thus, the compressor oil, which may enter into the system, will return back.
You may damage the compressor if you run it without considering this.
• Insert your product's plug into an outlet with alternative current of 220-240V/50 Hz only, which has been
installed according to the regulations. (Picture 13)
• You will hear a slight sound from the compressor when your product is running.
• The fan inside your product will stop when you open the door of your refrigerator.
• If the lights of your product are not on, set the 0-1 switch under the canopy to position 1. (Picture 14-15)
Picture 13 Picture 14
49
Picture 15
EN