Makita DCL181F Manual De Instrucciones página 10

1
► 1 . Securing lip
2. Connect capsule. Align O mark on capsule with O
mark on handle and then firmly twist capsule in direction
of arrow until it is secured.
► 1 . O Mark
► 1 . Handle 2. Capsule
NOTE: Always remove dust ahead of time, as suction power will be reduced if there is too much dust in
cleaner.
NOTE: Always be sure to check that high perfor-
mance filter is loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into the
motor housing, and cause motor failure.
If the following examples occur, high performance
filter is not loaded correctly. Reload them correctly to
rectify problem.
1
1
2
Problem Examples
Securing lip of high performance filter is not firmly
locked into groove of cleaner housing.
► 1 . Securing lip 2. Groove of cleaner housing
OPERATION
CAUTION:
To connect attachments, such
as nozzle, twist and insert the attachment in
direction of the arrow to secure the connection
during use. To disconnect the attachments, twist
and extract it also in direction of the arrow. If an
attachment is twisted in the opposite direction when
being connected or disconnected, the capsule may
become loose.
► 1 . Capsule
10 ENGLISH
1
1
2