Kohler K-124B16-SANA-CP Manual De Instrucciones página 12

Hybrid Battery
Power Cord
10. Install Hybrid Power Unit
IMPORTANT! Verify that you are following the correct power
system installation based on your model number. For a DC power
unit installation, refer to "Install DC Power Unit."
Unthread the control box screws to remove the control box cover.
Connect the power cords.
Place the hybrid battery into the empty space within the control
box.
Secure the control box cover to the control box.
IMPORTANT! The area in front of the sensor must be free of
objects during the 2 minute learning cycle or the faucet may not
function properly.
Allow 2 minutes for the sensor to cycle through the automatic
sensing distance.
1386732-2-A
Power Cord
12 Kohler Co.