Uline OHAUS RANGER H-9554 Manual Del Usuario página 13

PRINT LIBRARY [P.LIB]
Print the library data.
• No = disabled
• Yes = All library records stored in memory are
printed.
• End Print [End]
Advance to the next menu or return to the top of the
current menu.
COM1 MENU
Enter this menu to define communication parameters.
Default settings are in bold.
Reset
Baud Rate
Parity
Stop bit
Handshake
Alternate command Print (A...P...Z), Tare (A...T...Z), Zero (A...Z)
End COM
NOTE: The COM2 menu is only displayed if a
second interface is installed.
RESET [RESET]
Reset the COM menu to factory defaults.
• NO = no reset
• YES = reset
BAUD RATE [BAUD]
Set the baud rate.
• 300 = 300 bps
• 600 = 600 bps
• 1,200 = 1,200 bps
• 2,400 = 2,400 bps
• 4,800 = 4,800 bps
• 9,600 = 9,600 bps
• 19,200 = 19,200 bps
PARITY [PARITY]
Set the data bits and parity.
• 7 EVEN = 7 data bits, even parity
• 7 ODD = 7 data bits, odd parity
PAGE 13 OF 69
MENU SETTINGS CONTINUED
no, yes
300...9600...19200
7 even, 7 odd, 7 none, 8 none
1, 2
none, On-Off
Exit menu
• 7 NONE = 7 data bits, no parity
• 8 NONE = 8 data bits, no parity
STOP BIT [STOP]
Set the number of stop bits.
• 1 = 1 stop bit
• 2 = 2 stop bits
HANDSHAKE [H.SHAKE]
Set the flow control method. Hardware handshaking is
only available for COM1 menu.
• NONE = no handshaking
• ON-OFF = XON/XOFF software handshaking
ALTERNATE COMMAND [ALT.CMM]
Define command character for the Print, Tare and Zero
commands
Print
Set the alternate command character for Print.
• A to Z.
Tare
Set the alternate command character for Tare.
• A to Z.
Zero
Set the alternate command character for Zero.
• A to Z.
End COM1, End COM2 [End]
Advance to the next menu or return to the top of the
current menu.
LOCK MENU
The Lock Menu is a software-controlled option that
can lock menu settings to prevent tampering. Default
settings are in bold.
Reset
Lock Cal
Lock Setup
Lock Read
Lock Unit
Lock Print
Lock COM
End Menu Lock
no, yes
off, on
off, on
off, on
off, on
off, on
off, on
Exit menu
1021 IH-9554