Nevir NVR-8420 BVM Instrucciones De Uso página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Operation
This appliance has been designed to blend liquids such as dairy products,
sauces, fruit juices, soups; to mix drinks, shakes, etc. It can be used to mix soft
foods or to make purees with cooked ingredients, such as carrots or baby
food ingredients. You can also use the blender to make cocktails with
crushed ice. Never put in more than 10 ice cubes at a time.
Under no circumstance should the appliance be operated for more time
than what is necessary. After using the appliance continuously for one
minute, allow it to cool to room temperature to prevent it from overheating.
You can use it again after 10 minutes.
Do not put any wooden, plastic, glass, metal or similar objects in the jar.
1. Assemble the blender as explained in section "Assembly Instructions". Be
sure that it is assembled correctly.
2. Put food into the jar without exceeding 2/3 of the maximum capacity
(upper edge).
3. Put on the lid and press and the cap. Be sure that they are on correctly.
4. Plug in the power cord.
5. Put the speed selector between position 1 (low speed),2,3,4, and
5 (maximum speed) or P quick pulse at high speed. Leave it in this
position while operating the appliance (maximum of 1 minute of
continuous operation).
During operation hold the lid on firmly using both hands. NEVER remove the
lid while the appliance is operating.
6. If you want to add any ingredient during the blending process, remove
the dispenser cap and add ingredients through the hole in the lid.
7. When you obtain the desired result, place the speed selector in the off
position.
8. Unplug the cable from the mains and wait until the blade has stopped
turning.
9. Remove the jar from the main body and empty it.
3
Instructions for use
English
Tabla de contenido
loading

Tabla de contenido