Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Description
1. Cap
2. Lid
3. Glass Jar
4. Sealing ring
5. Cutting Blade
6. Cup base
7. Motor Housing (Base unit)
8. Speed Selector
Assembly instructions
1.
Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
2.
Put the blade unit with sealing ring into the cup base (6).
3.
Mount the glass cup (3) onto the cup base unit and tune the cup base unit,
in clockwise direction until it is fixed.
4.
Mount the glass jar with cup base on the base unit.
5.
After putting the ingredients in the jug, fix the lid (2) on the jug by pressing
down.
6.
Insert the inner cover (1) into the opening of the lid and tune it in
anticlockwise direction until it is locked.
Putting into Service
Electrical Connection
1. Connect the device to a duly installed 230V/50Hz protective contact socket.
2. Before inserting the plug into the socket. Make sure that the mains voltage
to be used matches that of the device. You can find this information on the
nameplate.
3
Instructions for use
English
Tabla de contenido
