Filter Cleaning - Blaupunkt BLUEBOT XVAC Manual De Instrucciones

DAILY MAINTENANCE
(Clean it regularly)
DUSTBIN AND FILTER
1. Press the button and pull out the dustbin backwards
2. Open and clean the dustbin
(Clean it regularly)

FILTER CLEANING

1. After every cleaning round, remove the filter gauze, sponge, and HEPA filter
2. Clean the removed filter gauze, sponge, and HEPA filter, if needed you can use water
3. Shake off the water drops and dry it naturally, then use it after it is completely dry
4. After it is dry, install it in the sequence, filter gauze - sponge - HEPA filter
Filter gauze
Button
Filter cover
Sponge
HEPA filter
• Please wash the filter using clear water and do not use any detergent
• Please do not clean the filter using a brush and fingers
• Dry the filter in the air for at least 24h
• Replace the filter every 3-6 months
26
EN