Different Cleaning Kits For Different Cleaning Purposes; Cleaning Modes - Blaupunkt BLUEBOT XSMART Manual Del Usuario

3.2

Different cleaning kits for different cleaning purposes

The robot comes with cleaning kits for different cleaning purposes.
See Table 4:
Cleaning purpose Floor type (examples)
dry cleaning carpets (< 2cm)
dry cleaning laminate flooring
wet cleaning laminate flooring and tiles floors
Table 4 - Selecting the suitable cleaning kit
See section 5.3 for instructions about installation of the correct cleaning kit.
3.3
The robot has five Cleaning modes.
•
Auto Cleaning mode:
Cleaning kits
The robot will first start mapping the area by cleaning the edges of the
area. When mapping is complete, the robot will start cleaning the area
normal suction nozzle
by zigzag movements. When finished, the robot will return to the
brush suction nozzle
charging station.
mopping kit
•
Edge Cleaning mode:
The robot will only clean the edges of the area. When finished, the robot
will return to the charging station.
•
Area Cleaning mode:
The robot will clean an area of 2 m² using maximum suction. Place the
robot on the desired area. When finished, the robot will stop automatically.
•
Random Cleaning mode:
The robot will clean the area by random movements. The robot is not
able to map the area. When the battery is almost empty, the robot will
return to the charging station.
•
Intensive Cleaning mode:
The robot will first start mapping the area by cleaning the edges. When
mapping is complete, the robot will start cleaning the area by zigzag
movements. The robot will then clean the area a second time. When
finished, the robot will return to the charging station.
Sections 6.2 and 6.3 describe how to select and run the various Cleaning
modes.

Cleaning modes

EN
47