EQUATION EF431LV-E Instrucciones De Montaje página 113

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
4. INSTALLATION
The minimum distances must be observed in the diagrams above.
For installation of the appliance, care must be taken not to damage concealed cables.
Please be careful whilst drilling holes.
This appliance is designed to be permanently fixed to a wall at a minimum height
of 300mm.The wall bracket must be fitted horizontally and the cable routed to
the bottom right of the heater.
A distance of 600mm from bottom of heater to floor is recommended for
optimum viewing of fuel bed; see Fig for recommend fixing dimensions.
For optimum viewing, mark the top five screws fixing positions on wall in
accordance with the recommend fixing dimensions.
NOTE: ensure that the bracket is level by using a Spirit level whilst marking out
the hole positions.
Drill holes with a No. six drill bit.
Fix the wall bracket using that the plug and screws provided.
Attach the lower fixing bracket the base of the fire using the two small black
screws supplied; ensure the bracket is fitted so that it is level with the back.
Carefully lift the heater up ensuring that the top rear ledge of heater engages with
the wall bracket and is sitting centrally. This process should be carried out by two
people to avoid injury or damage to property or the appliance.
Gently bring the heater down against the wall.
Mark the lower fixing bracket two fixing hole positions on the wall remove the
heater.
Drill the wall and insert the wall plugs.
Refit the heater to the wall and fasten the bottom fixing bracket to the wall using
the screws provided to permanently fix the heater in place.
Unpack the pebbles from the bag and place them along the light unit in the desired position.
Place the front surround over the front of the fire aligning the slots in the brackets at
each side of the front panel with the lugs on the sides of the fire.
Again two people will be required for this operation.
5. INSTRUCTIONS FOR USE
The appliance can be operated either by the switches located on the top right
hand side of the fire or by the supplied remote control.
113
FR
FR
ES
ES
PT
PT
IT
IT
EL
EL
PL
PL
UA
RU
KZ
RO
EN
UA
RO
BR
EN

Hide quick links:

Tabla de contenido
loading

Tabla de contenido