Speaker Connection - Sharp CD-BK110V Manual De Manejo

! Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) ter-
minal.
Right speaker
Red
Black
Caution:
" Use speakers with an impedance of 8 ohms or more, as lower impedance speakers
can damage the unit.
" Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the
unit.
" Do not let the bare speaker wires touch each other.
" Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
" Do not stand or sit on the speakers. You may be injured.
! Setting the AC voltage selector
Check the setting of the AC voltage selector located on the rear panel before plug-
ging the unit into an AC socket. If necessary, adjust the selector to correspond to the
AC power voltage used in your area.
Turn the selector with a screwdriver until the appropriate voltage num-
ber appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).
! Connecting the AC power lead
After making all connections, connect the AC power lead to the unit
and then into the wall socket. If you plug in the unit first, it will enter
the demonstration mode.
Left speaker
Notes:
" Unplug the AC power lead from the AC socket if the unit will not be in use for a pro-
longed period of time.
" Never use a power lead other than the one supplied. Use of a power lead
other than the one supplied may cause an electric shock or fire.
AC Plug Adaptor
In areas (or countries) where an AC socket as shown in illustration
nect the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC
plug adaptor is not included in areas where the AC wall socket and AC power plug
can be directly connected (see illustration
Incorrect
! Headphones
" Before plugging in or unplugging the headphones, reduce
the volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter
plug and are between 16 ohms and 50 ohms impedance.
The recommended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME but-
tons.
Demonstration mode (See page 10.)
is used, con-
).
ENGLISH
01/7/13 CD-BK110V(X)E1.fm
CD-BK110V
1
2
E-8