Lanaform Luxury Up & Down Manual Del Usuario página 5

ACCESSORIES
• 4 M6 x 30 bolts
• 4 M6 x 35 bolts
• 8 M6 washers
• 2 Locking knobs
• Screwdriver
ASSEMBLY INSTRUCTIONS
When unpacking your Luxury Up & Down, check that none of the parts is missing. Also check that the unit has not been
damaged in transport.
1) Place the support bar on top of the upper column and slide the connecting plug cable inside the column.
2) Attach the support bar to the upper column using four M6 x 35 bolts and M6 washers.
3) Insert the upper column into the lower column. Then lower the plastic cover. Lower the decorative ring to cover the
connection between the two columns.
4) Carefully align the holes at the sides of each column and secure with the locking knobs.
5) Connect the power supply cable as shown in the diagram.
6) Insert the end of the lower column into the base of the unit such that the bolt holes are correctly aligned. Insert the
M6 x 30 bolts with M6 washers into the holes in positions a, b, c and d and tighten them down
Your unit is ready for use.
Luxury Up & Down
EN
5