Craftsman evolv 900.24543 Manual De Instrucciones página 6

90565294 EVOLV GRINDER.qxd:1006292-00 11651 grinder
• Maintain an angle between the disc and
work surface (Fig. 11) of approximately
30° when grinding and 10°-15° when
sanding ( Fig. 12) for best tool control,
material removal, and minimal loading.
WARNING: Always wear eye
protection while operating this power
tool including face and body
protection when brushing.
11
12
MAINTENANCE
CLEANING
Blowing dust and grit out of the motor
housing using compressed air is a
necessary maintenance procedure.
CAUTION: Dust and grit from metal
grinding often accumulate on interior
surfaces and could create an electrical
shock hazard if not cleaned out.
Use only mild soap and a damp cloth to
clean the tool. Never let any liquid get
inside the tool; never immerse any part of
the tool into a liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed by
Sears Service Centers.
LUBRICATION
Craftsman Evolv tools are properly
lubricated at the factory and are ready for
use. Tools should be lubricated regularly
every year depending on usage. (Tools
used on heavy duty jobs and tools
6/8/10 7:49 AM
exposed to heat may require more
frequent lubrication.) This lubrication
should be attempted only by trained power
tool repair specialists such as those at
Sears Service Centers or in other qualified
service organizations.
REPLACEMENT GRINDING WHEEL
Replace the grinding wheel with a
Craftsman 4-1/2 inch Type 27, available
at Sears stores and other Craftsman
outlets.
10
Page 10
CRAFTSMAN Angle Grinder – MODEL NUMBER 900.24543
The Model Number will be found on the Nameplate. Always mention
the Model Number when contacting Sears about your tool.
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
REPLACEMENT PARTS LIST
ITEM PART
NO. NO. DESCRIPTION QTY
16 569176-00 Side Handle 1
35 569197-00 Spanner Wrench 1
36 5140005-33 Outer Flange 1
37 5140005-34 Inner Flange 1
38 569202-00 Screw 3
39 569203-00 Flange 1
40 5140092-62 Guard 1
47 5140016-99 Spring Washer 1
PARTS NOT ILLUSTRATED:
(Supplied with Unit)
90565294 Instruction Manual
Model No. Volts Amps RPM
900.245430 120 5.5 10,000
11