Ratio HR250NM Manual De Instrucciones página 31

SAFETY INSTRUCTION FOR CUTTING
1. Hold power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a
"live" wire may make exposed metal parts of the power tool "live" and could give the operator an
electric shock.
2. Always wear a dust mask
Additional safety rules:
1) Always wear eye protection.
2) Always wear ear protection during extended periods of operation..
3) Always inspect and remove all nails and screws etc before sanding.
4) Always check walls and ceilings to avoid hidden power cables and pipes. A metal detector
can be obtained from any good DIY store for this purpose.
5) Use the original accessories and the tool provided, no others.
6) Only use accessories in good condition. Do not use torn or worn accessories.
7) Do not turn the machine on whilst any of the accessories are resting on or inserted into the
work piece or material that you want to work with. Wait until the machine is up to full speed
before proceeding with your task.
8) Keep your hands away from cutting area. Do not reach under the material being cut.
9) The operating instructions and the enclosed safety information should be kept carefully for
later use and enclosed with the machine, should it be passed on or sold.
SYMBOL
To reduce the risk of injury, user must read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Waste electrical products must not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authorities or retailer for recycling advice.
31