Zone Navigation; User Settings - Airzone ZBS Manual Del Usuario

To edit the name of a schedule, press and hold the name of the zone to access the name editor. Then, change the name.
Keep in mind: If a wireless zone is renamed, the name will be displayed in the wireless controller after 5 minutes of inactivity or
after the first touch, whichever occurs first.
Delete: Deletes an existing schedule.
EN
Copy: Copies a schedule to apply it in any other zone.
EN

Zone Navigation

FR
From the main screen press on the name of the zone, a list with all the zones and their status will be displayed. This screen
enables the control of all the zones at the same time or individually, it is also possible to switch on/off the zones from this
screen, press < and > to see the rest of the zones.
IT
PT
Access to all the zones
DE
Access to the zone
Room temperature
of the zone
The "All zones" option gives access to the control of all the zones at the same time, broadcasting the changes to all of them.
Press on the zone's name to access to all the parameters of the zone and control them from your controller. When the system
detects a temperature error on a specific zone, the zone displays the error code instead of the room temperature (see section
Warnings and errors).

User Settings

These settings control and edit all the basic functionalities. Touch once to display the shortcuts. Press on each icon to access
the parameters.
Language. Select the language.
Brightness. Adjust the brightness and enable or disable the screen brightness when the screen saver is active.
Date and time. Press on the clock to set the time and the format type (12 or 24 hours). Press on the calendar to set the
date. Installations with webserver enable automatic time change.
Information. This parameter provides information on:
•
Zone: firmware, zone, association, actuator or status of the communications.
•
System: firmware, settings and information about the system controllers.
•
Devices: It displays the elements connected to the system.
•
Webserver (Only for system 1 Main controller): firmware, IP address, gateway, MAC and PIN.
•
Warnings and errors on system.
Clean screen: Select this option to clean the screen. The touch screen will lock for a few seconds.
10
Turn on/off
all the zones
On/Off of the zone
Set-point temperature
of the zone