Main Components; Preliminary Checks; Tools And Equipment - CAME RADIO COMMANDS Serie Manual De Instalación

4.4 Main components

1. Automatic closing time adjuster
trimmer
2. Working time adjuster trimmer
3. Button for memorising the radio
code
4. 2-Dip switch selector function
5. LED signal light
6. Socket for AF43S radio-frequency
card
7. Line fuse5A
8. 1 A accessories fuse
9. Connection terminals
Warning! Before acting on the
device, cut off the main power supply.
5 Installation

5.1 Preliminary checks

Before beginning to install, the following is necessary:
• Make sure the power supply is disconnected.
Make sure that the point where the electrical panel is anchored is free from any impacts, and that the surface is solid and that
proper tools and materials are used (i.e. screws, wall plugs, etc.).
Set up a suitable omnipolar cut-off device, with distances greater than 3 mm between contacts, with sectioned power
source
• Check that any connections inside the container (made for continuity purposes of the protective circuit) are fitted with
extra insulation compared to other internal conductive parts.
• Set up proper conduits and electric cable raceways, making sure these are protected from any mechanical damage.

5.2 Tools and equipment

Make sure you have all the tools and materials needed to carry out the installation in total safety and in accordance with
current regulations. Here are some examples.
+
1
3
7
L1 L2
U V W E1
TCA TL
- + -
PROG
QUADRO COMANDO
ZR24
E3 10 11 1 2 7 C1
9
2
4
5
6
8