Operating Instructions
Connect to
device or
adapter
Figure 1: Vehicle Power Adapter
1. Plug the VPA into the cigarette lighter socket of the
vehicle.
2. To charge your device, attach the USB-C cable to the
USB-C connector of the device. Use an appropriate
adapter (not provided) if the device does not support a
USB-C connector.
Table 1: LED Status Indication
LED
White
The VPA is receiving power from the outlet.
The VPA is not receiving any power from the outlet.
•
Ensure that there is power of 12 V or 24 V at
the cigarette lighter socket.
•
Remove any foreign objects or debris from the
Off
connector of the VPA, then, power cycle the
VPA.
•
Check that the device connected to the VPA is not
short circuited. Remove the faulty device and
power cycle the VPA.
Status
Connect to
cigarette
lighter socket
3