the position, open the panel behind the backrest (w). The panel clamps
into the back. Push a narrow object through the outer corner of the
upper belt opening against the panel to open the panel. Loosen the
two shoulder straps by inserting the attachment rings through the
openings. Insert the attachment rings through the desired openings so
that the shoulder belts are reattached and replace the panel.
· Regularly check the length and position of the belts and adjust them if
necessary.
Maxi-Cosi car seats
· The Maxi-Cosi car seat adapters are suitable for use with the following
Maxi-Cosi group 0+ car seats: Maxi-Cosi Pebbles, Maxi-Cosi Cabrio- fix,
Maxi-Cosi Citi.
· Always follow the instructions in your Maxi-Cosi car seat manual before
using the car seat.
· For all the steps below, ensure that the chassis is fully unfolded and the
brake is locked.
Placing the Maxi-Cosi adapters on the chassis (x)
· The adapter marked with 'R' is placed on the right side of the chassis
and the adapter marked with 'L' is placed on the left side.
· Lower the adapters into the attachment parts and press firmly until a
click is heard.
Placing the Maxi-Cosi car seat on the adapters
· Place the Maxi-Cosi car seat facing backwards on the chassis.
· Position the Maxi-Cosi car seat with the central hinge points of the
carrying bar directly above the adapters.
· Lower the Maxi-Cosi car seat and press it down on the adapters until a
click can be heard in both adapters. Check that the Maxi-Cosi car seat
has been placed horizontally and has been attached properly by trying
to lift it off the chassis.
Remove the Maxi-Cosi car seat from the adapters
· Operate the release system of the Maxi-Cosi car seat.
· Lift the Maxi-Cosi car seat straight up from the chassis.
Remove the Maxi-Cosi adapters from the chassis
· Slide the release button on the chassis attachment points upwards
until a click is heard. The adapter can now be removed from the frame.
24