Wilo Control SC-Booster Instrucciones De Instalación Y Funcionamiento página 102

Valid until Display
SCe
SC FC
SCe NWB
Except
SCe NWB
Except
SCe NWB
Installation and operating instructions Wilo-Control SC-Booster (SC, SC-FC, SCe)
Description
Speed in the event of a sensor fault.
Can only be changed when the drives are switched
off.
Type of the (relative) supply pressure. Can only be
changed when the drives are switched off.
If the intention is to use absolute pressure sensors,
please contact Wilo customer service.
The menu for the external setpoint
Activate external setpoint
Limit values
The maximum pressure which is to be permitted
on the outlet side. This value is set relative to the
current setpoint.
The absolute maximum pressure on the outlet side.
This value is automatically calculated based on the
relative maximum pressure and the current setpoint.
The minimum pressure which is to be permitted
on the outlet side. This value is set relative to
the current setpoint. The value 0 deactivates this
control.
English
Parameter range
Factory setting
f ... 60 ... f
min max
0 – 6
0 – 10
-1 – 9
-1 – 1
off (only p-c)
OFF
ON
101.0 ... 150.0 ...
300.0
0.0 ... 99.0
31