Overview Presentation; User Interface Area - Cristec HPOWER 12V/90A Manual Del Usuario

O
2.2
VERVIEW PRESENTATION
The chargers are divided into 2 zones :
The user interface zone
The energy conversion zone (all maintenance in this area is forbidden except with CRISTEC authorization, under penalty
of warranty termination)
Fixing of the charger is made by 4 x M6 round head screws (screw head diameter less than 10 mm).
Center distance :
Terminals :
J1201/J1202 : CAN Bus
X1200 : Remote display
X1201 : Battery temperature
probe
AC input terminals
Mounting by 2 x M6 round head
screws
U
2.3
SER INTERFACE AREA
Chargers HPO - See appendix 1
Chargers HPO 12-90, 24-45, 24-60 and 24-80 - See appendix 2
Charger HPO 24-100 – See appendix 3
on the rear side
DC output terminals
Opening screw for user interface area
(must be screwed to ensure personnel protection)
Front view
2 x M6 round head screws
32