Service And Warranty; Noise And Vibration - Dremel STYLO+ Instrucciones De Funcionamiento

CERTAIN CLEANING AGENTS AND
WARNING
!
SOLVENTS DAMAGE PLASTIC PARTS.
Some of these are: gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household detergents that contain
ammonia.

SERVICE AND WARRANTY

NO USER SERVICEABLE PARTS INSIDE.
WARNING
!
PREVENTIVE MAINTENANCE
PERFORMED BY UNAUTHORIzED PERSONNEL MAY RESULT
IN INCORRECT CONNECTION OF INTERNAL WIRING AND
COMPONENTS WHICH COULD CAUSE SERIOUS HAzARD. We
recommend that all tool service be performed by a Dremel Service
Centre. Servicemen: Disconnect the tool and/or charger from the
power source before servicing.
This DREMEL product is guaranteed in accordance with statutory/
country-specific regulations; damage due to normal wear and tear,
overload or improper handling are excluded from the warranty.
In case of a complaint, send the undismantled tool or charger and
proof of purchase to your dealer.
CONTACT DREMEL
For more information on service and warranty, the Dremel product
range, support and hotline, go to www.dremel.com.
2610Z09886.indd 8

NOISE AND VIBRATION

Sound Pressure Level (standard deviation 3dB) dB(A)
Sound Power Level (standard deviation 3dB) dB(A)
Vibration (triax vector sum) m/s
2
Vibration Uncertainty K m/s
2
NOTE: The declared vibration total value has been measured
in accordance with a standard test method and may be used
for comparing one tool with another. It may also be used in a
preliminary assessment of exposure.
THE VIBRATION EMISSION DURING
WARNING
!
ACTUAL USE OF THE POWER TOOL
CAN DIFFER FROM THE DECLARED
TOTAL VALUE DEPENDING ON THE WAYS IN WHICH YOU
USE THE TOOL. MAKE AN ESTIMATION OF THE ExPOSURE
IN THE ACTUAL CONDITIONS OF USE AND IDENTIFY THE
SAFETY MEASURES FOR PERSONAL PROTECTION
ACCORDINGLY (TAKING ACCOUNT OF ALL PARTS OF THE
OPERATING CYCLE SUCH AS THE TIMES WHEN THE TOOL
IS SWITCHED OFF AND WHEN IT IS RUNNING IDLE IN
ADDITION TO THE TRIGGER TIME).
8
<70
–
<2.5
1.5
1/18/18 7:48 AM