Put Into Operation; Venting; Setting The Operating Mode; Troubleshooting - Wilo Yonos MAXO-Z Instrucciones De Instalación Y Funcionamiento

7

Put into operation

7.1

Venting

1. Charge the system appropriately and ventilate.
▶ The pump is self-ventilating.
7.2

Setting the operating mode

1. Adjust desired operating mode with operating button ➜
Fig. 20.
▶ The LED display shows the operating mode (c1, c2, c3) or the
setpoint in m (at Δp-c, Δp-v).
7.3

Troubleshooting

The red fault signal LED lights up when a fault occurs; additionally
an error code will show on the LED display.
NOTICE
Follow detailed instructions on the internet for
troubleshooting ➜ See QR code.
Installation and operating instructions Wilo-Yonos MAXO-Z
en
21