Stalgast 9725000 Instrucciones De Uso página 21

appliance. The power cord with plug is NOT part of the kit and must be purchased.
• The device must be connected to an equipotential equalization system using the equipotential screw
on the back of the device. It is marked with the following symbol:
• On the 979250, the equipotential screw is located on the back leg of the device.
To connect the device to an electrical equalizing system:
• loosen the nut on the screw
• enter the equipotential conductor
• tighten the nut all the way
• connect the other end of the equipotential cord to the equalizer.
Figure 4. Connecting the unit to an electrical equalizing system.
Rear panel components:
1. Equipotential bolt
2. Terminal box
3. Rating plate
Figure 6. Back view of unit 9750000. Unit 9726000 is equipped similarly.
The power cord should be flexible, oil-resistant, earthed, polychloroprene-coated - it can be made by the
manufacturer and available from him or in specialist repair shops!
Rear panel components:
1. Terminal box
2. Equipotential bolt
Figure 5. Back view of unit 9755000.
- 21 -