Moser 1233 Traducción Del Manual De Uso Original página 14

Ocultar thumbs Ver también para 1233:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
ENGLISH
Changing the blade set
de
Attention! The cutting length adjustment lever (B)
must not be locked. It will be unlocked by moving
en
the locking switch (F) upward (Fig. 3ⓑ).
fr
1. Press the locking lever (J) downwards (Fig. 8ⓐ) and,
at the same time, grip the bottom blade by the shaped
it
recesses in its sides (M) (Fig. 8ⓑ).
2. When the locking lever is pressed, pull the bottom
blade off the appliance (Fig. 9ⓐ).
es
3. Push the top blade downwards and remove it
(Fig. 9ⓑ).
pt
4. Place the new top blade on the plastic guide and press
it down (Fig. 10ⓐ), so that the hook (H) of the retainer
nl
spring locates in the blade cutout (Fig. 10ⓑ) and the
guide groove of the top blade (K) clicks into the plastic
da
guide.
5. Hold the new bottom blade by the shaped recesses
in the sides (M) and insert it into the guide groove (L)
sv
(Fig. 11).
6. Slide the bottom blade forwards until it engages in
no
position.
fi
Problem elimination
tr
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
pl
f Clean and oil the blade set (Fig. 6/7); if this does
not resolve the problem, replace the blade set
(Fig. 8/9/10/11).
cs
Skin injury
sk
Cause: Too much pressure on the skin.
f Reduce pressure when cutting close to skin.
hr
Cause: Cutting angle is too steep.
hu
f Hold appliance flatter to the skin.
sl
Cause: Damaged blade set.
f Check whether the blade edges were damaged during
use and replace the blade set if necessary.
ro
Appliance is not working.
bg
Cause: Defective power supply.
f Make sure that contact between the mains and the
ru
socket is faultless. Check the mains cable for possible
damage.
uk
In the event that this information does not help you resolve
your problem, please contact our service centre. Never
et
attempt to repair the appliance yourself!
lv
lt
el
ar
14
Disposal
Handle with care! Environmental damage in
the event of incorrect disposal.
f Correct disposal will ensure environmental
protection and prevent any potentially harmful
impact on people and the environment.
Adhere to the relevant legal requirements when disposing
of the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regula-
tions are specified for the disposal of electrical
appliances, based on EU Waste Electrical and
Electronic Equipment Directive 2012/19/EC
(WEEE). In accordance with this, the appliance
can no longer be disposed of with the local or
domestic waste.
The appliance will be accepted free of charge by
local collection points or recycling centres.
The packaging for this product is made from
recyclable materials. Dispose of this in an environ-
mentally friendly manner by recycling it.
Tabla de contenido
loading

Tabla de contenido