Technical Data; Before Beginning Work - Hilti TE 5 Manual De Instrucciones

Hilti TE 5 Rotary Hammer
Double insulation
Accessories and kit for Hilti TE 5 rotary hammer:
Hilti lubricant spray, key-type chuck, quick-release chuck, case or cardboard box
dust shield
During operation, the sound pressure level may exceed 85 dB (A). In such case,
it may be necessary to take suitable protection against the noise.

Before beginning work:

When working with the machine, it must be held with two hands. Always make
sure that you have a safe stance/foothold.
1. Check that the electric supply corresponds to the information on the rating
plate.
2. The TE 5 is double insulated and need not be earthed (grounded).
3. Do not apply excessive pressure to the TE 5 – hammering/impact power will
not be increased. Simply position and guide the TE 5.
4. Check that the direction of rotation is set correctly.
Before starting to work, please read the enclosed safety precautions.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070995 / 000 / 00

Technical data

Power input:
Voltage (versions):
Current input:
Frequency:
Weight:
Speed under load:
Hammering speed under load:
Single impact energy:
Drill bit diameter range:
Recommended range:
Drilling performance in B35 concrete:
Drill bits in standard programme:
TE-C drill bits
TE-C-S drill bits
TE-C-HB forming bit
Chuck
Carbon brushes with automatic cut-out
Double insulation, class II
Slip-type clutch as protection against motor overloading
Sealed against dust, permanent lubrication (maintenance free)
Variable speed control switch with infinite regulation
Reversing switch
Adjustable side handle with depth gauge
Automatic hammering cut-out when idling
Setting lever for hammer drilling/rotary drilling only
Right of technical modifications reserved.
Always wear ear Always wear pro- Always wear safety
protectors. tective gloves. glasses.
500 W
230 V 115 V
2.3 A 4.6 A
50–60 Hz
2.8 kg / 6.2 Ibs
0–800 r.p.m.
0–4000 blows per minute
2.0 joules / 1.5 ft-lb
"– ") dia. in concrete
5–20 mm ( 3 / 3 /
16 4
"– ") dia.
5–10 mm ( 3 / 3 /
16 8
"/6") dia.= 24 cm
8/150 mm ( 5 / 3
16
(1.46 in. 3 ) = 480 mm/min.
"– ") dia.
4–16 mm ( 5 / 5 /
32 8
"/ ") dia.
18 mm / 20 mm ( 5 / 3 /
8 4
"–1") dia.
10–24 mm ( 3 /
8
TE-C
This Product is Listed
by Underwriters
Laboratories Inc.
and bears the Mark:
/min.