Mixing Valve
Stem
Detent
Mixing Valve
Knob
Farenheit
Celcius
3. Complete Trim Installation – All Models
NOTE: Units sold internationally will have Celsius temperature
numbers of 32, 40 and 49 on the mixing valve.
Press the mixing valve knob onto the mixing valve stem so the
knob button and "104" or "40" mark face upward (toward the
escutcheon detent, as shown in the illustration).
Verify that the knob does not rotate counterclockwise. Do not
press the knob button while trying to rotate the knob.
Turn on the water for a few minutes. Check the water
temperature with a thermometer to confirm that it is at 104° F
(40° C).
If the water temperature matches the marked setting, then rotate
the knob fully counterclockwise so the "120" or "49" mark faces
upward.
Let the water run briefly and check the water temperature with
the thermometer to confirm that it is at 120° F (49° C).
If the water temperature matches the marked setting, then rotate
the knob clockwise so the "104" or "40" mark faces upward again.
Kohler Co.
Detent
Detent
Screw
O-Ring
Apply silicone
Grip Ring
lubricant if needed.
9
Detent
Cap
1012606-2-B