Setting Menu; Standby Mode; Vox Mode - Miniland digimonitor 2.4 gold Manual De Instrucciones

enter into the sub-menu.
4. Press RIGHT /LEFT
select the desired camera to delete and press the
key.
Note 1: If you only have one camera paired to the
monitor, you won't be able to remove it.
Note 2: A channel needs to be deleted before pairing
to a new camera unit.

5.2.9.2. SETTING MENU

5.2.9.2.1. DATE & SETTING TIME
To set the time and date, follow the next steps:
1. Press the Menu/Back
pop up.
2. Press the UP key or DOWN
setting icon is highlighted then press RIGHT
enter into the sub-menu.
3. Press UP or DOWN key to select data & time icon
then press RIGHT key to enter into the sub-menu.
4. Press the RIGHT
element you wish to adjust: the year, month or day;
the hour or minutes; or finally the 12 or 24-hour time
format.
5. Press UP key to increment or press DOWN
key to decrement.
6. Press key to confirm the date.

5.2.9.2.2. STANDBY MODE

With the Standby mode you can choose the maximum
time the monitor image remains active (1, 3 or 5
minutes); after this time the image disappears but the
sound continues to be heard in order to save energy.
To reactivate the image, just press the Power key (12).
To activate this mode you should:
1. Press the Menu/Back
pop up.
2. Press the UP key or DOWN
setting icon is highlighted then press RIGHT
enter into the sub-menu.
3. Press UP or DOWN
then press RIGHT
4. Press UP or DOWN
OFF/1min/3min/5min;
5. Press key to save the setting.
6. Press the Menu/Back key twice to return to the
main screen.
Note 1: Once you press the Power button (12) to turn
on the screen again, the touch panel will be locked. To
unlock it, please, follow the steps suggested on the
5.2.2 section of this instruction manual.
Note 2: The Standby function is deactivated when the
device is in DUAL mode.
Note 3: If the device is in Standby mode and you do not
wish to wait 1, 3 or 5 minutes for the screen to turn itself
off, press the ON button (12) to turn it on immediately.

5.2.9.2.3. VOX MODE

This mode allows you to control the sound activation
of your baby monitor. If you activate the VOX mode
on the monitor and there is no sound around the
camera, it stops transmitting. The monitor screen
turns off when the camera is not transmitting. When
/UP /DOWN
key and the menu will
key until the
or LEFT key to select the
key and the menu will
key until the
key to select standby icon
key enter into the sub-menu.
key to select the option
the camera detects any sound louder than the set
key to sensitivity level it will start transmitting the signal to
the monitor again.
To disable this feature and see the area monitored
continuously, turn off the VOX mode on the monitor.
· VOX mode OFF: The camera transmits continuously,
allowing you to monitor your baby or the area you
wish to monitor continuously.
· VOX mode ON: The camera only transmits when it
detects a sound with sufficient intensity, according to
the level selected, around the camera.
To activate this function, first of all make sure you
have set the standby mode to 1/3 or 5 minutes (see
point 5.2.9.2.2). Choose 1/3 or 5 if you want your
camera to stop transmitting the image after 1/3 or 5
key minutes if there is no sound around.
Once the standby time is set, to activate VOX mode,
please, follow the next instructions:
1. Press the Menu/Back
pop up.
2. Press the UP
setting icon
enter into the sub-menu.
3. Press UP or DOWN key to select VOX icon
then press RIGHT
4. Press UP
option: OFF/1/2/3 (default OFF). Set sensitivity to "1"
for a baby that sleeps peacefully and cries quietly and
"3" if the baby tends to make noise while sleeping or
makes fairly loud noises before actually crying, or set
it to "2" level if you consider that your baby's behavior
does not fit either of the two previous patterns.
5. Press
6. Press the Menu/Back
main screen.
7. VOX icon (F) will be displayed at the top of the LCD
key screen.
Note 1: The VOX will remain off when in DUAL mode.
Note 2: If the device is in VOX mode and you do
not wish to wait 1, 3 or 5 minutes for the screen to
turn itself off, press the ON button (12) to turn it on
immediately.
5.2.9.3. LULLABIES
You can soothe the baby to sleep by playing a gentle
lullaby from the baby unit. To activate this function:
1. Press the Menu/Back
pop up.
2. Press the UP
icon is highlighted then press RIGHT key enter into
the sub-menu.
3. Press UP
available lullabies, silence or loop reproduction (default
OFF).
4. When you have selected the tune, press the
and the volume control will appear. Press the UP
DOWN key to select the level of volume from 1 to 5
(the pre-set level is 2) and press the
5. Press the Menu/Back
main screen.
6. Lullaby icon (E) will be displayed on the LCD screen.
23
key and the menu will
key or DOWN
is highlighted then press RIGHT
key to enter into the sub-menu.
/DOWN key to select the VOX
key to save the setting.
key twice to return to the
key and the menu will
key or DOWN key until the lullaby
or DOWN key to select one of the 5
key twice to return to the
ENGLISH
key until the
key
key
/
key.