Miniland digimonitor 2.4 gold Manual De Instrucciones página 21

(2) will illuminate green to indicate the unit is ON.
To turn it OFF press and hold the Power button (12)
again.
If for some reason your monitor blocks, press and
hold the Power button (12) until the unit turns off.
5.2.1.2. CAMERA:
To turn the camera on or off, keep the Power button
(III) pressed in for two seconds. The ON/link LED (IX)
will go on and off depending on whether you turn the
unit on or off.
When you have installed the camera and turned it
on, you can see the images and listen to the sounds
captured in your baby's room via the monitor.
5.2.2. TOUCH PANEL LOCK
If you need to lock the touch panel in order to prevent
the accidental activation of a function, press the
Power button (12).
When you press the power button (12) the screen will
turn itself off automatically. If you wish to keep the
screen on but locked, press the Power button (12)
again. The padlock icon (N) will indicate that the touch
display is locked.
To unlock it:
If your screen is off:
1. Press the Power button (12) again.
2. A lock icon will appear on the LCD screen. Turn
the browsing key three-quarters in an anti-clockwise
direction to unlock the touch display.
If your screen is on:
A lock icon will appear on the LCD screen when you
touch any key on the display. Turn the browsing key
three-quarters in an anti-clockwise direction to unlock
the touch panel.
Note: Once the screen turns off, the touch panel will
be locked automatically.
5.2.3. MONITOR VOLUME
Press the UP or DOWN
will pop up. Then, press the UP key
to select the desired volume level from level 0 ~ 8.
(The default volume level setting is level 4).
You may exit the function in the following manner:
1. Press the Menu/Back key
2. Do not touch the monitor for 15 seconds.
5.2.4. MONITOR BRIGHTNESS
Press the LEFT key and the brightness bar will pop
up. Then, press the LEFT
select the desired brightness level from level 1 ~ 8.
(The default volume level setting is level 4).
You may exit the function in the following manner:
1. Press the Menu/Back key
2. Do not touch the monitor for 15 seconds.
5.2.5. TALKING TO THE BABY
You may talk to your baby from the parents' unit (for
example, to calm it down and so it understands you'll
be with it in a moment) or to your partner (if he or she
is in the baby's room).
keys and the volume bar
or DOWN key
.
key or RIGHT key to
.
Press the Talk to the baby button (13), keep it pressed
in and talk in front of the monitor. A microphone icon
(O) will be displayed in the middle of the LCD Screen
while this function is working. Release the button
when you have finished talking to listen to the sound
from the baby's room again.
Bear in mind that you can't listen to your baby whilst
you're talking to it; to listen to it, you will have to stop
pressing this button.
Note: If your monitor is locked the button used to
speak to the baby will be disabled. Unlock the monitor
in order to use this function.
5.2.6. DIGITAL ZOOM
You may increase the size of the image viewed,
carrying out a zoom.
Press the Nav RIGHT & Zoom key (7) to access the
zoom function. Once we are in this mode, we will be
able to move through the screen with the Navigation
Buttons of the monitor (UP
, LEFT ).
Zoom icon (D) will be displayed at the top of the LCD
screen.
To exit the zoom function you can:
1. Press the Menu/Back key
2. Don't touch the monitor in 15 seconds.
5.2.7. INFRARED NIGHT VISION (AUTOMATIC)
The infrared night vision function allows the camera to
pick up images in dark or low light conditions.
In this mode, only black and white images will be
displayed on the monitor and only objects located less
than 2 meters away can be seen.
The camera automatically changes to infrared mode
when there is insufficient light for normal vision.
When the camera is in this mode, the night vision icon
(C) will be displayed on screen.
Note: The light sensor (II) is located at the top of
the camera. Take care not to cover the sensor with
any object to prevent the camera from entering night
mode when there is light in the room.
5.2.8. OUT OF RANGE WARNING
If the monitor is located at a distance away from
the camera which is greater than that allowed (see
the technical characteristics), the on/link LED of the
camera (IX) will flash in red. On the monitor, the
welcome screen and the out of range symbol on the
top left corner of the screen will appear. In addition
a beep sound will be heard every 12 seconds as an
advice that both units are not communicating.
Bring the monitor closer to the camera to see the
image correctly again.
5.2.9. MAIN MENU
Press the Menu/Back key
access the main menu.
5.2.9.1. CAMERA MENU
5.2.9.1.1. CHOOSING THE CAMERA
This product is designed to allow the observation of
21
ENGLISH
, DOWN , RIGHT
on your monitor to