Gwarancja I Serwis - VERTO 52G584 Manual Del Usuario

GWARANCJA I SERWIS

Warunki gwarancji oraz opis postepowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service
Ul. Pograniczna 2/4
02-285 Warszawa
Sieć Punktów Serwisowych
i pogwarancyjnych dostępna na platformie internetowej gtxservice.pl
Grupa Topex zapewnia dostępność części zamiennych oraz materiałów
eksploatacyjnych dla urządzeń i elektronarzędzi.
Pełna oferta części i usług na gtxservice.pl. Zeskanuj kod QR i wejdź:
tel. +48 22 573 03 85
fax. +48 22 573 03 83
e-mail [email protected]
do napraw gwarancyjnych
GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE CHAIN SAW READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
CHAIN SAW SAFETY WARNINGS:
• Hold the power tool by insulated gripping surfaces only,
because the Saw chain may contact hidden ring. Saw chains
contacting a ,,live" wire may make exposed metal parts of the power
tool "and could give the operator an electric shock.
• Keep all parts of the body away from the saw chain when the
chain saw is operating. Before you start the chain saw, make
sure the saw chain is not contacting anything. A moment of
inattention while operating chain saws may cause entanglement of
your clothing or body with the saw chain.
• Always hold the chain saw with your right hand on the
rear handle and your left hand on the front handle.
Holding the chain saw with a reversed hand configuration
increases the risk of personal injury and should never be done.
Note: For chain saws designed with the guide bar on the left side,
the reference to ,, right hand" and ,,left hand" positioning is reversed.
• Wear safety glasses and hearing protection. Further protective
equipment for head, hands, legs and feet is recommended.
Adequate protective clothing will reduce personal injury by flying
debris or accidental contact with the saw chain.
• Do not operate a chain saw in a tree. Operation of a chain saw
while up in a tree may result in personal injury.
• Always keep proper footing and operate the chain saw only
when standing on fixed, secure and level surface. Slippery or
unstable surfaces such as ladders may cause a loss of balance or
control of the chain saw.
• When cutting a limb that is under tension be alert for spring
back. When the tension in the wood fibres is released the spring
loaded limb may strike the operator and/or throw the chain saw out
of control.
• Use extreme caution when cutting brush and saplings. The
slender material may catch the saw chain and be whipped toward
you or pull you off balance.
• Carry the chain saw by the front handle with the chain saw
switched off and away from your body. When transporting
or storing the chain saw always fit the guide bar cover. Proper
handling of the chain saw will reduce the likelihood of accidental
contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and
changing accessories. Improperly tensioned or lubricated chain
may either break or increase the change for kickback.
• Keep handles dry, clean, and free from oil and grease. Greasy, oily
handles are slippery causing loss of control.
• Cut wood only. Do not use chain saw for purposes not intended.
For example: do not use chain saw for cutting plastic, masonry or
non-wood building materials. Use of the chain saw for operations
different than intended could result in a hazardous situation.
CAUSES AND OPERATOR PREVENTION OF KICKBACK:
Kickback may occur when the nose or tip of the guide bar touches an
object, or when the wood closes in and pinches the saw chain in the
cut. Tip contact in some cases may cause a sudden reverse reaction,
kicking the guide bar up and back towards the operator. Pinching
the saw chain along the top of the guide bar may push the guide bar
rapidly back towards the operator. Either of these reactions may cause
you to lose control of the saw which could result in serious personal
injury. Do not rely exclusively upon the safety devices built into your
saw. As a chain saw user, you should take several steps to keep your
cutting jobs free from accident or injury. Kickback is the result of tool
12
CHAIN SAW
52G584