Making The Connections; Setting The Clock - Panasonic RC-DC1 Instrucciones De Funcionamiento

Making the connections

Rear view
To household
mains socket
Connect the AC adaptor.
• Do not use an AC adaptor from other equipment.
• Do not use any other AC adaptors except the supplied one.
• The unit is in the standby condition when the AC adaptor is
connected. The primary circuit is always "live" as long as the
AC adaptor is connected to an electrical outlet.

Setting the clock

The clock is displayed once the main unit is connected to the
household mains socket.
Reset the clock regularly to maintain accuracy (monthly
accuracy + /– 60 seconds).
1
Press and hold [SET/PRESET] for 2 seconds.
2
Press [2/–, ADJ] or [+/6, ADJ] to select the day.
3
4
To change the clock display
In clock mode, press and hold [+, VOL] and [–, VOL] at the
same time for 2 seconds to select between a 12-hour or 24-hour
display.
For 12-hour display:
AM : "PM" is not displayed.
FM indoor antenna
PM : "PM" is displayed.
Daylight saving time (summer time)
In clock mode, press and hold [SLEEP] to activate or cancel
daylight saving time (summer time) function.
"DST" is displayed when the function is activated.
This function allows you to set the clock's time to be the same
time as your iPod or iPhone's time (Z page 7, "Compatible iPod
and iPhone").
Press [TIME SYNC] while an iPod or iPhone is docked unto
the main unit.
Note:
• Exact synchronisation of an iPod or iPhone with the main
• Compatibility depends on the software version of your iPod
Press [SET/PRESET] again to confi rm.
Repeat steps 2 and 3 to set the hour and minute.
Example:
Synchronising clock with iPod or iPhone time
unit is not possible. There could be a difference of up to
59 seconds between them.
or iPhone.
9 9
9