Safety precautions
Placement
Set the unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and
excessive vibration. These conditions can damage the
cabinet and other components, thereby shortening the
unit's service life.
Place it at least 15 cm away from wall surfaces to avoid
distortion and unwanted acoustical effects.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can
overload the unit and cause a fi re.
Do not use a DC power source. Check the source
carefully when setting the unit up on a ship or other
places where DC is used.
AC adaptor protection
Ensure the AC adaptor is connected correctly and
not damaged. Poor connection and lead damage can
cause fi re or electric shock. Do not pull, bend, or place
heavy items on the lead.
Grasp the plug fi rmly when unplugging the adaptor.
Pulling the AC adaptor can cause electric shock.
Do not handle the plug with wet hands. This can cause
electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can
cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause
electric shock or malfunction. If this occurs,
immediately disconnect the unit from the power supply
and contact your dealer.
Do not spray insecticides onto or into the unit. They
contain fl ammable gases which can ignite if sprayed
into the unit.
Service
Do not attempt to repair this unit by yourself. If sound
is interrupted, indicators fail to light, smoke appears,
or any other problem that is not covered in these
instructions occurs, disconnect the AC adaptor and
contact your dealer or an authorised service centre.
Electric shock or damage to the unit can occur if the
unit is repaired, disassembled or reconstructed by
unqualifi ed persons.
Extend operating life by disconnecting the unit from the
power source if it is not to be used for a long time.
5
5
5