Product Characteristics; Technical Data; General Instructions - YATO YT-73138 Manual Original

PRODUCT CHARACTERISTICS

The detector can detect live wires, ferromagnetic and diamagnetic metal elements as well as
wooden beams in walls. The two-pin probe allows the device to measure the relative humidity
of soft materials such as wood, paper, and cardboard as well as hard materials like concrete,
masonry mortar, and plaster. Thanks to the clear display and easy operation, it is possible to
quickly and precisely perform the measurement. Small size and battery power supply ensure
high mobility of the device.
CAUTION! This device is not a measuring instrument within the meaning of the Trade Metrology Act.
ACCESSORIES
The detector is supplied complete and does not require assembly. Only installing the batteries is
required for the device to function properly. Batteries are not included.

TECHNICAL DATA

Parameter
Catalogue No.
Type of detected objects
Detection range
- ferromagnetic metals
- diamagnetic metals
- live wires (AC)
- wood (accurate method)
- wood (deep method)
Wood relative humidity
Hard materials relative humidity
Power supply
Operating temperature
Storage temperature
Dimensions
Weight (without battery)

GENERAL INSTRUCTIONS

Do not use the detector near strong electromagnetic fi elds or high-frequency electrical signals. Do
not use the detector in an environment where the ambient temperature is outside the operating
range. If the device is stored in temperature beyond the operating range, wait until the device
reaches the temperature within the operating range, before using it.
Shielded wires or low-voltage signal cables (CATV, computer) will only be detected as metal
elements. If the detected objects are further than the maximum range of the detector, they will
not be detected.
Avoid using the detector on wet or damp surfaces. Objects in metal walls will not be detected.
Some factors, such as material type and temperature can aff ect the humidity measurement. Do
not use the product for measurements for inspection purposes.
Do not expose the detector to water, including rain. Do not place the device with other tools in the
toolbox. Impacts can damage the detector.
Transport the detector in the supplied case.
Remove the battery from the device if it will not be used for a longer time. Do not store the detec-
tor at temperatures above 60
The product is intended only for measuring the parameters of the materials listed in the manual.
Do not use the product to measure the parameters in other materials. Do not use the product for
12
O R I G I N A L
GB
Unit
[mm]
[mm]
[mm]
[mm]
[mm]
[ C]
O
[ C]
O
[mm]
[kg]
C, as this can damage the LCD.
O
I N S T R U C T I O N S
Value
YT-73138
wood, metal, live wires (AC)
120
80
50
20
38
5% - 50% / ±2%
1.5% - 33% / ±2%
9 V DC (9F22)
0 ÷ +50
-10 ÷ +60
200 x 77 x 20
0.13