Returning To Original Position; Cruising In Other Conditions; Cruising In Salt Water; Cruising In Turbid Water - Yamaha F6A Manual Del Propietário

RETURNING TO ORIGINAL
POSITION
1) Place the tilt lock lever in the lock posi-
tion.
2) Slightly tilt up the engine until the tilt-
support bar automatically returns to the
free position.
3) Then, slowly lower the engine to the nor-
mal position.
EMU00316
CRUISING IN OTHER
CONDITIONS

CRUISING IN SALT WATER

After operating in salt water, wash out the
cooling-water passages with fresh water to
prevent them from becoming clogged-up
with salt deposits.
NOTE:
@
Refer to cooling system flushing instructions
in "TRANSPORTING AND STORING OUT-
BOARD MOTOR".
@

CRUISING IN TURBID WATER

It is strongly recommended that the optional
chromium-plated water-pump kit be installed
if the outboard is to be used in turbid
(muddy) water conditions.
3-51
GB