Sangean DT-210 Instrucciones De Manejo página 5

Search tuning
1. Switch on the radio by pressing the Power
button.
Note:
The radio is originally set to be 90 minutes
auto shut off after Power is switched on
( symbol will appear on the display).
If you don't need this feature, press Power
button for more than 2 seconds until symbol
removed from the display.
2. Select the required waveband by
repeatedly pressing the Band button.
On FM and TV band (DT-210V only ),
connect the supplied earphones as the
antenna or the wire antenna. On AM(MW)
and LW band (DT-210L), rotate the radio
for best reception.
3. Press and hold down either the Tuning Up
or Down buttons until frequency in the
display begins to change rapidly.
Release the button.
4. The radio will scan the selected waveband,
stopping each time if finds a station of
sufficient strength. Adjust the volume
control to the required level.
GB
4