Main Components - Probuilder 43653 Manual De Instrucciones

Check that the item does not contain nails,
screws or other objects that may damage the
saw blade.
The saw blade will not stop immediately
when you release the on/off button.
Make sure that the plunge saw does not
damage any objects, cables or pipes under
or behind the workpiece, e.g. when sawing in
� oors, walls and ceilings.
Make sure not to twist the saw, especially
when bevelling. This may cause the saw to
run backwards suddenly up from the saw
groove.
When sawing through workpieces, the
sawing depth must be set so that the blade
does not go through the workpiece by more
than the height of one saw tooth.

Main components

1. Safety button
2. On/off button
3. Rear handle
4. Allen key (small, supplied with purchase
of 33048)
5. Allen key (large)
6. Motor unit
7. Dust extraction adapter
8. Fine adjustment screw to 0°
8a. Fine adjustment screw to 45°
9. Soleplate
9a. Saw line indicator
10. Eccentric screw for guide rail
11. Lock knob for bevel angle
12. Lock knob for depth adjustment
13. Depth scale
14. Saw blade
GB
29