Probuilder 43653 Manual De Instrucciones página 30

14a. Lock screw and � ange
14b. Opening
15. Front handle
16. Cutting width marks
17. Dust extraction nozzle (swivels)
18. Clamp for replacing saw blade
19. Spindle lock
20. Groove for guide rail
30
Only with purchase of guide rail (33048):
21. Guide rail
22. Lock screw for guide rail
23. Joint link
Preparation
Replacing saw blades
1. Unplug the saw. Push the safety button
(1) up and push the motor unit (6)
forward.
2. Open the clamp (18) and release the
safety button (1). The motor unit engages
with a click.
3. The lock screw and � ange (14a) are now
accessible in the opening (14b).
4. Press and hold the spindle lock (19) and
remove the lock screw and � ange (14a)
using the large Allen key (5).
5. Lift the saw blade (14) off . Do not dispose
of the old blade in your domestic refuse.
Dispose of it correctly in accordance with
local guidelines. Clean any chips and
sawdust from the spindle and lock screw.
Lubricate the locking screw with a drop
of acid-free oil.