Product Safety Information; Product Specifications - Ingersoll Rand 728 Serie Especificaciones Del Producto

Product Safety Information

Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
●
Failure to observe the following warnings, and to avoid these potentially hazardous
situations, could result in death or serious injury.
● Always turn off the air supply, bleed the air pressure and disconnect the air supply hose
when not in use, before installing, removing or adjusting any accessory on this tool, or
before performing any maintenance on this tool or any accessory.
● Always use a Dead Handle with Model 728NA3 and 728N8K.
For additional information refer to Product Safety Information Manual Form 04580353.
Manuals can be downloaded from ingersollrandproducts.com.

Product Specifications

Type of
Models
Handle
728JA1 Pistol
728J6K Pistol
728LA2 Pistol
728L6K Pistol
728NA3 Pistol
728N8K Pistol
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
03527256_ed18
WARNING
Chuck Free
Capacity Speed
in (mm) rpm
5/16 (8) 3800
3/8 (10) 3800
3/8 (10) 2100
3/8 (10) 2100
1/2 (13) 950
1/2 (13) 950
WARNING
Sound Level dB(A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
-- --
85 106
85 106
-- --
84 105
-- --
* K = Vibration measurement uncertainty
EN
Vibration (m/s²)
(ISO28927)
) Level *K
w
3.7 0.8
3.7 0.8
3.7 0.8
3.7 0.8
3.4 0.8
3.4 0.8
EN-1