Product Safety Information; Product Specifications - Ingersoll Rand 7RAQT4 Tapper Especificaciones Del Producto

Product Safety Information

Intended Use:
These Air Drills are designed for tapping operations.
●
Failure to observe the following warnings, and to avoid these potentially hazardous
situations, could result in death or serious injury.
● Always turn off the air supply, bleed the air pressure and disconnect the air supply hose
when not in use, before installing, removing or adjusting any accessory on this tool, or
before performing any maintenance on this tool or any accessory.
● The Reverse Valve Cap and Actuating Valve Cap are under Spring pressure. Use care
when removing either Cap.
For additional information refer to Product Safety Information Manual Form 04580353.
Manuals can be downloaded from ingersollrandproducts.com

Product Specifications

Model(s) Style
7RAQT4 Pistol
7RAQT4-EU Pistol
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
*K = Vibration measurement uncertainty
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
16572273_ed3
WARNING
Free Tapper
Speed Capacity
rpm in (mm)
475 1/2 (13)
475 1/2 (13)
WARNING
Sound Level dB (A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
82.9
82.9
EN
Vibration
m/s²
(ISO28927)
) Level *K
w
93.9 <2.5
93.9 <2.5
--
--
EN-1