11_Elastogel; 12_Heart Rate Monitor; 13_Name And Components List - Elite TUO Instrucciones

the bike as power source.
This way, TUO is more precise since the power data
measured by the sensor are more precise than those TUO
can calculate with its formulas.
Note: this function cannot be used if no power sensor is
installed on the bike.
USE
- Enabling / Disabling
You can enable or disable the PML via the Elite My E-training
app. All versions of the app support the ability to enable or
disable this function.
In order to enable/disable the PML, start the app and make
sure it's paired with the home trainer.
Go to: Settings - PML. Current home trainer setting pops up
after a few seconds, then you can modify it. Tap OK to save
the new settings in the home trainer.
- Coupling
On start-up, TUO automatically looks for a few seconds for
any power sensors present. If it finds one, it connects to it and
uses its data. For this reason, it is good to ensure that the
power sensor is transmitting before powering the trainer.
Moreover, once connected, TUO will save the serial number
of the sensor for the following training sessions.
If in the room there are more power sensors, TUO will connect
to the power sensor with the strongest signal, that will
normally be the one on the bike.
- Following sessions
The following sessions, every time it is switched on, TUO will
try to connect always to the sensor it coupled with the first
time.
If it cannot connect to the sensor or the sensor is not present,
TUO will use its algorithms to calculate the power.
- Reset
If you wish to change the sensor, just power the trainer
making the wheel move (even manually) or pedalling a few
times within few seconds. In fact, on start-up, if the speed
exceeds zero, TUO resets the sensor saved in the memory
and starts looking for another sensor, as if it were the first
time.
When the TUO resets the serial number of the power sensor,
it performs 6 slight vibrations to confirm the cancellation.
It is also possible to reset the home trainer via the Elite My
E-Training app. Go to the Settings - PML page.
NOTES:
- This function is not available if there's a power meter
installed on the bike.
- If TUO has connected to an incorrect sensor, just reset the
coupled sensor and repeat the coupling operation, paying
attention to move the sensor you do not want TUO to connect
to, away.
- If, during training, TUO loses the connection with the power
sensor, it goes automatically to using the formulas to
calculate the power. In the meantime, it keeps trying to
re-connect with the sensor.
- The trainer looks for ANT+ sensors first and Bluetooth
afterwards. If the power sensor is both ANT+ and Bluetooth,
very likely the trainer will latch on to the ANT+ signal.
- The cancellation vibrations are very light. To feel them, it
may be necessary to lay your hand on the resistance unit.
- If there are Bluetooth cranks / pedals, the home trainer will
only connect with one of the two. It is not possible to
predetermine which one it will connect to. Moreover, as each
pedal / crank only measures power developed by the related
leg, the displayed value is about half of the total power
developed by the cyclist. In this case, enable the "Half Power"
option via the My E-Training app (Settings page) to display
proper values.
- During the initial search for power sensors, the green LED
flashes quickly.

11_ELASTOGEL

ELITE, in conjunction with BAYER, introduces ELASTOGEL , a
technopolymer applied to the roller of the trainer resistance
unit that offers the following advantages:
- 50% noise reduction (quantified in dB).
- improves the tire grip to the resistance roller.
- reduces tire wear by 20%.
- reduces vibrations and replicates real-life riding.
- improves the performance of the trainer using mtb tires.
A two part manufacturing process allows ELASTOGEL to
withstand abrasions, solvents, oils and heat yet remains
highly elastic.

12_HEART RATE MONITOR

- TUO hometrainer does not read heart rate monitor data.
Heart rate monitor data can be read directly from a device
that includes a heart rate function.
- Compatibility with various types of heart rate monitors
depends on the device / software / app being used only
ANT+ and is also compatible with Bluetooth Smart monitors
allowing connection with monitors by both protocols.

13_NAME AND COMPONENTS LIST

TUO hometrainer includes the following components:
N.1 Workstand
N.1 Unit
N.2 Caps for wheels over 28"
N.1 Power supply
N.1 Quick Release
N.1 10 mm Straddle wrench
N.1 10 mm left adapter
EN
(Rif. A)
(Rif. B)
(Rif. C)
(Rif. D)
(Rif. E)
(Rif. F)
(Rif. R)
49