Ferm TSM1036 Manual Del Usuario página 6

4. Keep other people away
• Keep other people away especially children,
do not let them touch your power tool or
cable and keep the children away from your
working area.
5. Store the unused power tools safely.
• Unused power tools should be locked up or
stored in a place that is dry and out of reach
of children.
6. Do not overload your power tool.
• You work better and safer in the specified
power range.
7. Use the correct power tool.
• Do not use low-power machines for heavy
work
• Do not use the power tool for purposes that
they are not intended for. For example you cannot cut tree limbs or a log of wood using
a hand saw.
8. Wear suitable clothing.
• Do not wear loose clothing or jewelry; they
can be caught in the moving parts.
• When working outdoors non-skid footwear is
recommended.
• For long hair, wear a hairnet.
9. Use protective equipment.
• Wear protective goggles
• When doing work that generates dust, use a
breathing mask.
10. Connect the vacuum device
• If connection to the vacuum and catcher
are available then you know that these are
connected and properly used.
11. Do not use the cable for purposes that it is not
intended for.
• Do not use the cable to the connector to pull
it out of the socket. Protect the cable from
heat, oil and sharp edges.
12. Secure the power tool.
• Use clamps or a vice to hold the power tool.
It is safer than holding it with your hand.
13. Avoid an abnormal posture.
• It ensures stability and keeps you balanced
at all times.
14. Keep and maintain tools with care.
• Keep the cutting tools sharp and clean, this
ensures that you work better and that it is as
safe as possible.
• Follow the lubricating and tool changing
instructions.
• Check the connection cable of the power
6
tool regularly and let a qualified expert repair
any damages.
• Check the extension cables regularly and
replace them if they are damaged.
• Keep the handles clean, dry and free of
grease and oil.
15. Unplug the power tool from the power outlet.
• When you are not using the power tool, when
you conduct maintenance and when you
change your tools such as blades, drills and
cutters.
16. Do not leave the key inside the tool.
• Before switching it on, make sure that keys
and setup tools have been cleared
17. Avoid unintentionally switching the power tool
on.
• Verify that while connecting the plug into the socket that the power is off.
18. Use the extension cables while outdoors.
• When using the power tool outdoors make
sure to use the appropriate and approved
labeled extension cable.
Additional safety instructions
1. When using the saw blades with hard metal teeth
(Carbon tipped) it is advisable to use blades with
a negative or slightly positive cutting angle. Do
not use any saw blades with deeply cut teeth.
They can grip the protective cap.
2. Attention: First carefully assemble all the parts
before starting work. Follow the procedure as
indicated.
3. If you are not familiar with using such a machine,
you would be better to be informed first by a
professional, an instructor or by a technician.
4. Always clamp or press the workpiece firmly
against the saw guide, before you carry out the
process. The use of all possible clamping set-ups
is preferable to using your hands.
5. Important: If you are holding the workpiece by
hand for the process to be carried out, keep
a minimum distance of 100 mm from the saw
blade.
6. Always press the workpiece against the bench.
7. Keep the saw blade sharp and check regularly
whether it rotates freely without abnormal
vibrations. Replace the saw blade if necessary.
8. Allow the machine to rotate freely until it reaches
the maximum number of revolutions, before you
start the process.
9. Maintain the air inlets at the back and the