Installation Instructions - PNI Clementine 9440 Manual Del Usuario

Installation instructions

1. Read carefully before installing the device.
2. The device should be installed by professional installer.
3. After connecting all the other parts(speakers, radio antenna, etc),
connect the power wires.
4. Exposed wires should be insulated.
5. Before installing the device, wires should be tucked away neatly.
6. The device should be connected only to direct current of 10V~15V.
7. Connect the wires according to the connection diagram.
Any mistake will cause malfunctioning or damaging the electric system.
1. Removing keys.
2. Mount the 1DIN frame in the dashboard
3. Curve the blocks to fit the frame in the
dashboard.
4. Slide the main unit into the frame.
Procedure of installation
1. Main unit
2. Mounting frame
3. Connection cables
4. Nut
5. Shrapnel
6. HM5x15 hexagon bolt
7. Clapboard
8. Fixed iron bar
9. BA5x15 self-tapping screw
9