Turntable
This glass plate is placed on the ring bearing in the middle of the
oven and must be engaged with the drive. It can be used for all types
of cooking. Containers containing food to be cooked or to collect
particles and juices produced by food during cooking are placed on
the turntable. It is easily removed for cleaning.
INSTALLATION
Preparation
Unpack the accessories, wash them and wipe them off carefully.
Position the ring bearing and then the turntable in the centre of the oven.
The turntable must be properly engaged with the drive.
Position
Your appliance can be installed in one of two ways:
• On a worktop: Position the appliance on a flat and stable surface, capable of
supporting the oven and its contents. The oven must be handled with care,
remembering that the control panel side is the heavier.
• In a niche: The niche must be at least 85 cm above floor‐level. Centre the
appliance in the niche so that it does not touch the sidewalls.
Adequate ventilation is essential: the minimum clearances are 20 cm above the
oven and 10 cm at the sides and rear.
Install the appliance away from any source of heat such as a traditional oven or
radiator. It has been designed and tested for use in ambient temperatures up to
35°C.
Ensure that the ventilation holes of the appliance are not obstructed.
INSTRUCTIONS FOR USE
The following recommendations will help you get the greatest benefit from using
your oven. Please read them carefully.
Your appliance can be used to defrost, reheat and cook foods much faster than is
possible with traditional cooking methods.
Foods
Forbidden foods
If you choose a cooking method using microwaves, you should never:
• Attempt to fry food – it is impossible to control the temperature of the oil and
other fats – fire‐risk.
EG-8